Product Categories / Water Treatment / CMC Biocides for Water Treatment

CMC 3395 Quaternary Bezalkonium Chloride CT Biocide

Product description

CMC 3395 is an algae control and biocide used as strong cationic biocide for cooling tower water system treatment program in liquid form , the product contain combination of benzalkonium chloride in liquid form , formulated to kill gram negative and gram positive bacteria and microorganisms.

Application

CMC 3395 is normally fed continuously to the circulating cooling tower water system by injection dosing pump ,
the amount of to inhibit bactericide depends on the type of system and plant operation condition ,the specified dosage
rates will be specified by our technical representative.

Great Value benefits

  • CMC 3395 cost-effective, broad-spectrum biocides.
  • CMC 3395 the key component of benzalkonium chloride antimicrobial activity is membrane destruction, which is most effective against Gram-positive bacteria, Gram-negative bacteria, enveloped viruses, fungi, yeasts and protozoa.
  • CMC 3395 is Non-toxic, Non-tainting & Odor-free at use dilutions.
  • CMC 3395 offers Rapid, Safe, Powerful Antimicrobial activity at low ppm.
  • CMC 3395 control or suppress many species of planktonic, filamentous, and branched algae, red macro-algae (Bangia atropurpurea), mixed culture of green and blue-green algae, diatoms (Cyclotella cryptica, C. pseudostelligera and Stephanodiscus binderanus).

Recommended Use Directions

  • CMC 3395 standard dose is 250 mL to 1.5 L CMC 3395 per 1000 liter of feed water contact time 4 to 6 hours.
  • CMC 3395 must be dosed according to the analysis of feed water, and the planet condition.

Specification

Appearance : Clear blue liquid
Odour: : Characteristic
pH at 25°C :  4.5 – 6.5
Density at 25°C : 1.3 ±0.03 gm/cm³

Safety

Use only a dime-sized amount of CMC 3395. Upon contact with a person’s eyes, it can cause irritation. The eyes should be flushed out with water for at least 15 minutes, and if the irritation continues or increases, seek medical help.

Packaging type

HDPE container sealed cap

Storage Conditions

Store in a cool, dry and good ventilated place. Keep container tightly closed after opening. Prevent direct sun light or ignition sources.

Temperature Limit

max 35°C.

Maximum Storage Period

24 Months under standard storage conditions.

DOWNLOAD